Full automatic Glass Cutting Machine
Equipment specifications:
Can cut glass maximum size: 2500 * 2000 mm
Taken the bench height: 900 + 50 mm.
Taken the equipment weight: 1.8 T.
Taken the cutting thickness: 2 ~ 19 mm
Cutting parameters are:
Straight parallel: 0.25 mm/m
Taken the diagonal accuracy: 0.30 mm/m (above precision accuracy of cutting wire before snapping piece shall prevail)
Taken the cutting bridge speed: 0 ~ 160 m/min. (adjustable)
Cut 3.0 m/s squared acceleration or greater
Painted frame speed 150 m/min or more of the cutting tools
Taken the cutting head acceleration acuity 6.0 m/s squared
Taken the air-flotation transmission
Taken the cutting head positioning accuracy error of plus or minus 0.15 mm or less
The power/power:
Taken the installed power supply requirements: 380 v / 50 hz
Taken the actual power equipment: 8 kw.
Taken the compressed air: 0.6 PA.
Equipment performance
Taken the equipment frame: after aging treatment, ensure the surface deformation, and the accurate parallelism.
Taken the cutting knife: turn 360 degrees of rotation of the cutting tools, cut up and down (to accurately cut any straight lines and various special-shaped glass)
Taken the mesa: adopt waterproof panel. Can effective moistureproof, not out of shape.
Felt: imported industrial felt good flatness, (high fiber and wool) and anti-static.
Taken the positioning system, pneumatic machinery and photoelectric scanning positioning.
Taken the oil way: pneumatic automatic oiling. And under the knife in sync,
Mechanical parts
Taken the bedplate: imported combet (flatness + / - 0.20 mm/m or less).
Rack/guide: Japan KHK
Taken the knife wheel/wheel clamp: Germany bo le.
Rinou copy
Taken the domestic computer mainframe, Microsoft Windows interface.
Taken the voltage: 380 v / 50 hz. With the pressure equipment.
Motor yaskawa servo motor (abnormity and linear cutting effect is very good).
Guide: silver on Taiwan
Rack: KHK
Taken the proximity switch: chint
Taken the control card: treasure.
Taken the main electric elements: omron and chint.
Taken the pneumatic proportional valve: Japan SMC
Software: Po lun cutting software and optimization software (optional)