2520 automatic glass cutting machine

Equipment specifications:

Can cut glass maximum size: 2500 * 2000 mm

Taken the bench height: 900 + 50 mm.

Taken the equipment weight: 1.8 T.

Taken the cutting thickness: 2 ~ 19 mm

Cutting parameters are:

Straight parallel: 0.25 mm/m

Taken the diagonal accuracy: 0.30 mm/m (above precision accuracy of cutting wire before snapping piece shall prevail)

Taken the cutting bridge speed: 0 ~ 160 m/min. (adjustable)

Cut 3.0 m/s squared acceleration or greater

Painted frame speed 150 m/min or more of the cutting tools

Taken the cutting head acceleration acuity 6.0 m/s squared

Taken the air-flotation transmission

Taken the cutting head positioning accuracy error of plus or minus 0.15 mm or less

The power/power:

Taken the installed power supply requirements: 380 v / 50 hz

Taken the actual power equipment: 8 kw.

Taken the compressed air: 0.6 PA.

Equipment performance

Taken the equipment frame: after aging treatment, ensure the surface deformation, and the accurate parallelism.

Taken the cutting knife: turn 360 degrees of rotation of the cutting tools, cut up and down (to accurately cut any straight lines and various special-shaped glass)

Taken the mesa: adopt waterproof panel. Can effective moistureproof, not out of shape.

Felt: imported industrial felt good flatness, (high fiber and wool) and anti-static.

Taken the positioning system, pneumatic machinery and photoelectric scanning positioning.

Taken the oil way: pneumatic automatic oiling. And under the knife in sync,

Mechanical parts

Taken the bedplate: imported combet (flatness + / - 0.20 mm/m or less).

Rack/guide: Japan KHK

Taken the knife wheel/wheel clamp: Germany bo le.

Rinou copy

Taken the domestic computer mainframe, Microsoft Windows interface.

Taken the voltage: 380 v / 50 hz. With the pressure equipment.

Motor yaskawa servo motor (abnormity and linear cutting effect is very good).

Guide: silver on Taiwan

Rack: KHK

Taken the proximity switch: chint

Taken the control card: treasure.

Taken the main electric elements: omron and chint.

Taken the pneumatic proportional valve: Japan SMC

Software: Po lun cutting software and optimization software (optional)